The CS-400E Cut & Clinch Insertion Machine offers programmable Lead Length and Clinch Angle.

Axial Resistors

On the illustrations below you can see the examples of inward, outward clinches and various lead lengths for the axial resistors.

Various Lead Length

Lead Lengths have 10 different settings, Clinch Angle is the same for all components.

Inward clinch, 10 different settings for Clinch Angles, Lead Lengths are the same

Outward clinch, 10 different settings for Clinch Angles, Lead Lengths are the same

The CS-400E Cut & Clinch Inserter

Brochure CS-400E Component Locator

In the case of multi-leaded components, like SIPs, DIPs, normally only two leads are clinched to secure the part. However, you have the option to clinch more or all the leads if desired.

10-pin SIP

Transistor

Components with the odd number of leads processed in two steps: two leads on the first step, and one lead and one phantom location for the second lead.

Radial resistor

The CS-400E can be programmed to clinch leads sideways for the components with the lead spacing 0.1”.

40-pin DIP socket